October 2nd, 2009

While there is great value in installing custom interior wooden shutters, sometimes they are still too expensive for certain applications. Some alternatives – including poly or vinyl shutters – are less expensive, but also much less attractive. For a high quality solution at a lower price, looking for a company that some solid wood shutter panels that can be installed in any configuration, sold.

When shopping for individual shutter panels, thereare a few considerations to keep in mind. The most important factor is the material used in the interior shutter panels to make. Linde has the best characteristics for window shutters because it is a very straight hard wood with little distortion. Linde also has a fine, uniform texture and indistinct grain, which make them superior for dyeing or painting too. You should also look for a company that a variety of panel sizes so you get the best deal work can fitfor your windows.

As the amount of each panel sizes are on order

The best way is to determine how you will mount your shutters before ordering the shutter panels. Sometimes it is necessary to use hanging strips on shutters, secure the outside of the window opening. A reputable company will provide information about the different installation methods so that you determine how best to install on a specific window to.

Width:

Measure the width of the area you want theshutters to cover (NOT including any trim strips).

1. Divide this width by the number of panels you want across the window. This will give you the approximate width of each panel. Round this measurement up to the nearest 1/4 inch.

Example:
Width = 36-7/16″

Divide by 4 and round up to nearest 1/4″

Order (4) shutter panels 9-1/4″ wide

Height:

Up to 1″ may be trimmed off the top and the bottom of each individual panel (a total of 2″ per Panel).

1. For a two-tier unit (panels across the top and bottom), combine individual panel heights required.

Finishing

A high-quality wood shutter panel can be painted or stained a beautiful end. Even if the shops and seems to come very smooth, a light sanding prior to the start of the finishing process to advise you. After sanding and brushing dust, primer and paint can be applied. Often a smooth surface is achieved by spraying the primer andto paint despite the use of high-quality brush can also be a good finish. When staining, follow the manufacturer's instructions given spot. The stain manufacturer may recommend applying a wood conditioner before staining to ensure even stain color penetration.

Once your shutters are finished and installed, you have a quality product that will increase the value of your home at a fraction of the cost of custom-made shutters.